Wellbore Genius
Column hydraulics calculator
Enter the column, run the rate sweep, and read every results panel on this page. Same solver, panels and CSV exports as the builder results screen.
Saved wells
Loading the wells shared with your team…
Intervals
Each interval carries its own rate, depth window, hole/pipe sizes and fluid properties. Friction uses the rheology law selected below.
Swipe the table sideways to reach the remaining columns.
| Interval | Top (ft) | Bottom (ft) | Rate (gpm) | Hole ID (in) | Pipe OD (in) | MW (ppg) | PV (cP) | YP (lbf/100ft²) | |
|---|---|---|---|---|---|---|---|---|---|
Column & limits
Geotherm, applied surface pressure and stress limits.
Sweep
Every interval rate is scaled by the multiplier axis and the whole column is re-solved per point.
Live preview
ok
- TD
- 10,500 ft
- ECD
- 12.23 ppg
- Friction
- 1,106 psi
No calculation yet
Press Calculate — the operating point, depth and rate charts, friction regime, injectivity, pressure profile, constraint breakdown, cost model, per-interval table, sweep grid and all CSV exports appear right here.