Wellbore Genius
Well specsNot feeding the pad plan yetStarting values
The five numbers a log or core report gives you for the target interval. Switch them on and the pad plan solves at your depth, over your pay thickness, against your closure stress — instead of the starting case that ships with the library.
My interval
Depth and thickness set where and how tall the stage is solved. Closure stress sets what the fracture has to open against — a pressure test or a cored stress profile still overrides it downstream, because those measured it in place.
Off ⇒ nothing here changes the plan; the numbers are just saved.
500 – 25,000 ft
5 – 2,000 ft
500 – 20,000 psi
0.001 – 0.4 fraction
0 – 5,000 mD
Mid-pay depth (solved at)
9,090 ft
Base of pay
9,180 ft
Closure gradient at mid-pay
0.825 psi/ft
Pore volume in pay
97,751 bbl/acre
Porosity and permeability are recorded with the interval and shown here. The fracture kernel has no porosity or permeability term, so they are not fed into the fracture growth calculation — they describe the rock for the reservoir and production side.
Field database
Saved in this browser
Store this interval and its pad plan as a well. Switch to it later and the pad plan and pressure-test case pick the same depth, thickness, closure stress, stage spacing and stage count back up.